Test your knowledge about Dimensional Standards for various piping fittings used in chemical plants and refineries. This is first MCQ in this category.
1. Which one of the following is a Dimensional Standard for Valves, Flanged, Threaded, and Welding End
B16.34
B16.28
B16.9
B16.36
2. Which one of the following is a Dimensional Standard for Factory-Made Wrought Buttwelding Fittings
B16.48
B16.38
B16.9
B16.42
3. Which one of the following is a Dimensional Standard for Stainless Steel Pipe
MSS-SP-58
B36.19
B16.42
B16.38
4. Which one of the following is a Dimensional Standard for Cast Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
B16.34
B16.20
B16.48
B16.1
5. Which one of the following is a Dimensional Standard for Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads
B16.14
B16.48
B16.36
B16.42
6. Which one of the following is a Dimensional Standard for Swage(d) Nipples and Bull Plugs
MSS-SP-95
B16.42
B16.11
B16.42
7. Which one of the following is a Dimensional Standard for Welded and Seamless Wrought Steel Pipe
B16.20
B16.38
B36.10
MSS-SP-95
8. Which one of the following is a Dimensional Standard for Large Metallic Valves for Gas Distribution (Manually Operated, NPS 21/2 to 12, 125 psig Maximum)
B16.34
B16.38
B16.36
B16.20
9. Which one of the following is a Dimensional Standard for Wrought Steel Buttwelding Short Radius Elbows and Returns
B16.1
B16.28
B16.36
B16.14
10. Which one of the following is a Dimensional Standard for Face-to-Face and End-to-End Dimensions of Valves
B16.9
B36.10
B16.10
B16.36
Result
You have attempted 0 of 10 questions
Correct Answers : 0 of 10
Percentage Marks : 0%